/* Science chapters 1–12 */
(() => {
const { mc, inp, ord, DONE } = window.QH;
const S = 'science';
BOOK.push(
{ id: 's1', subj: S, n: 1, title: 'Respiration and moving', strand: 'Biology', codes: ['8Bs.01', '8Bs.02', '8Bs.03', '8Bs.04'],
  secs: [
    { n: '1.1', t: 'Blood', w: 'blood',
      intro: 'Spin a blood sample in a centrifuge, then tap each layer to find out what it does.',
      tasks: [['Spin the tube', s => s.spun], ['Explore all three layers', s => s.seen >= 3]],
      notice: [<><b>Plasma</b> (about 55%) carries dissolved nutrients, carbon dioxide and the blood cells.</>, <><b>Red blood cells</b> carry oxygen using haemoglobin. They have no nucleus.</>, <><b>White blood cells</b> protect against pathogens.</>],
      check: [mc('Which part of the blood transports oxygen?', ['Plasma', 'Red blood cells', 'White blood cells', 'Platelets'], 1, 'Haemoglobin in red cells binds oxygen.'), mc('What does plasma carry?', ['Only oxygen', 'Dissolved nutrients, carbon dioxide and blood cells', 'Only white cells', 'Nothing'], 1, 'Plasma is the transport liquid.')] },
    { n: '1.2', t: 'Human respiratory system', w: 'lungs',
      intro: 'Drag the slider to breathe in. Watch the diaphragm and ribs, then switch to gas exchange in an alveolus.',
      tasks: [['Breathe in fully', s => s.mode === 'breathe' && s.t >= 0.95], ['Watch gas exchange', s => s.mode === 'gas' && s.t > 0.3]],
      notice: [<>Breathing in: the <b>diaphragm contracts</b> and flattens, and the <b>intercostal muscles</b> lift the ribs. Volume goes up, so air flows in.</>, <>In the alveoli, <b>oxygen diffuses</b> into the blood and <b>carbon dioxide diffuses</b> out.</>, <><b>Breathing</b> moves air. <b>Respiration</b> is a chemical reaction in cells.</>],
      check: [mc('When you breathe in, the diaphragm…', ['relaxes and moves up', 'contracts and flattens', 'stays still', 'pushes air out'], 1, 'Contracting flattens it, increasing the chest volume.'), mc('Oxygen moves from the alveoli into the blood by…', ['respiration', 'diffusion', 'breathing', 'digestion'], 1, 'From high to low concentration.')] },
    { n: '1.3', t: 'Skeleton, joints and muscles', w: 'arm',
      intro: 'Bend and straighten the arm. Watch the biceps and triceps, then look at a ball-and-socket joint.',
      tasks: [['Bend the elbow below 70°', s => s.joint === 'hinge' && s.a < 70], ['Look at a ball-and-socket joint', s => s.joint === 'ball']],
      notice: [<>Muscles can only <b>pull</b>, so they work in <b>antagonistic pairs</b>.</>, <>To bend the arm the <b>biceps contracts</b> and the triceps relaxes. To straighten it, the reverse happens.</>, <><b>Hinge joints</b> (elbow, knee) move in one plane; <b>ball-and-socket</b> joints (hip, shoulder) move in all directions.</>],
      check: [mc('To straighten your arm…', ['the biceps contracts', 'the triceps contracts', 'both relax', 'both contract'], 1, 'The triceps pulls the forearm straight.'), mc('Which is a ball-and-socket joint?', ['Knee', 'Elbow', 'Hip', 'Finger'], 2, 'The hip allows movement in many directions.')] },
  ],
  practice: [mc('White blood cells…', ['carry oxygen', 'protect against pathogens', 'carry glucose', 'clot blood only'], 1, 'They fight infection.'), mc('Intercostal muscles are found…', ['in the heart', 'between the ribs', 'in the diaphragm', 'in the arm'], 1, 'Inter-costal means between the ribs.'), mc('Why must muscles work in pairs?', ['They are weak', 'They can only pull, not push', 'To save energy', 'For balance'], 1, 'One pulls each way.')],
  challenge: [mc('Why do red blood cells have no nucleus?', ['To move faster', 'More space for haemoglobin, so they carry more oxygen', 'They are dead', 'To fight germs'], 1, 'The structure suits the function.'), mc('Give one way alveoli are adapted for gas exchange.', ['Thick walls', 'A large surface area and thin walls', 'Few capillaries', 'Low blood supply'], 1, 'Thin walls and a large area speed up diffusion.')],
  recap: { points: ['Blood: plasma, red cells (oxygen), white cells (defence).', 'Breathing: diaphragm and intercostals change the chest volume; gases diffuse in the alveoli.', 'Antagonistic muscles move bones at joints (hinge, ball-and-socket).'], terms: [['Haemoglobin', 'The protein in red cells that carries oxygen.'], ['Alveoli', 'Tiny air sacs in the lungs where gas exchange happens.'], ['Antagonistic pair', 'Two muscles that pull in opposite directions.']] } },

{ id: 's2', subj: S, n: 2, title: 'Nutrition', strand: 'Biology', codes: ['8Bp.01', '8Bp.02', '8Bp.03'],
  secs: [
    { n: '2.1', t: 'A balanced diet', w: 'diet',
      intro: 'Build a meal by tapping foods. Try to cover every nutrient.',
      tasks: [['Cover at least 6 nutrients', s => s.covered >= 6], ['Cover all 9', s => s.all]],
      notice: [<><b>Carbohydrates</b> and <b>fats</b> provide energy; fats are also an energy store.</>, <><b>Protein</b> is for growth and repair. <b>Vitamins</b> A, C and D and the minerals <b>calcium</b> and <b>iron</b> keep the body healthy.</>, <>Water and fibre are needed too.</>],
      check: [mc('Which nutrient is needed for growth and repair?', ['Carbohydrate', 'Protein', 'Fat', 'Vitamin C'], 1, 'Protein builds new cells.'), mc('Lack of iron can cause…', ['weak bones', 'anaemia (tiredness, few red blood cells)', 'scurvy', 'night blindness'], 1, 'Iron is needed to make haemoglobin.')] },
    { n: '2.2', t: 'The effects of lifestyle on health', w: 'sort',
      cfg: { bins: ['Helps health', 'Harms health'], items: [['Regular exercise', 0], ['Smoking', 1], ['Eating fruit and vegetables', 0], ['Too much sugar', 1], ['Enough sleep', 0], ['Lots of saturated fat', 1], ['Drinking water', 0], ['Inactive lifestyle', 1]] },
      intro: 'Sort each lifestyle choice by its effect on growth, development and health.',
      tasks: DONE,
      notice: [<>Too much sugar or fat can lead to <b>obesity</b>, tooth decay and heart disease.</>, <><b>Smoking</b> damages the lungs and heart. Tar causes cancer and carbon monoxide reduces the oxygen carried.</>, <>Exercise and a balanced diet support <b>healthy growth</b>.</>],
      check: [mc('Carbon monoxide in cigarette smoke…', ['improves fitness', 'reduces the oxygen the blood can carry', 'adds vitamins', 'has no effect'], 1, 'It binds to haemoglobin instead of oxygen.'), mc('Which lifestyle choice reduces the risk of heart disease?', ['Smoking', 'Regular exercise', 'A high-fat diet', 'Inactivity'], 1, 'Exercise strengthens the heart.')] },
  ],
  practice: [mc('Vitamin D helps…', ['eyesight', 'strong bones', 'skin', 'blood clotting'], 1, 'It helps the body absorb calcium.'), mc('Which food is high in carbohydrate?', ['Rice', 'Fish', 'Butter', 'Spinach'], 0, 'Starch.'), mc('Animals store energy as…', ['protein', 'fats and carbohydrates', 'water', 'vitamins'], 1, 'Fat and glycogen.')],
  challenge: [mc('An athlete needs more energy. Which nutrients are most important?', ['Vitamins', 'Carbohydrates and fats', 'Calcium', 'Fibre'], 1, 'They are energy sources.'), mc('Why might smoking during pregnancy affect a baby\'s growth?', ['Nicotine is a vitamin', 'Less oxygen reaches the baby', 'The baby gets more food', 'It has no effect'], 1, 'Carbon monoxide reduces oxygen transport.')],
  recap: { points: ['A balanced diet: carbohydrate, protein, fats, vitamins A/C/D, calcium, iron, water, fibre.', 'Carbohydrates and fats provide and store energy.', 'Diet, exercise and smoking affect growth and health.'], terms: [['Balanced diet', 'All nutrients in the right amounts.'], ['Deficiency', 'Not enough of a nutrient.'], ['Obesity', 'Being very overweight.']] } },

{ id: 's3', subj: S, n: 3, title: 'Ecosystems', strand: 'Biology', codes: ['8Be.01', '8Be.02', '8Be.03'],
  secs: [
    { n: '3.1', t: 'Habitats and ecosystems', w: 'match',
      cfg: { h: ['Ecosystem', 'A habitat within it'], pairs: [['Coral reef', 'Crevices in the coral'], ['Rainforest', 'The canopy'], ['Desert', 'Under a rock'], ['Pond', 'The muddy bottom'], ['Grassland', 'Burrows underground'], ['Arctic tundra', 'Snow drifts']] },
      intro: 'An ecosystem contains many habitats. Match each ecosystem to a habitat found inside it.',
      tasks: DONE,
      notice: [<>An <b>ecosystem</b> is all the living organisms in an area plus the non-living environment.</>, <>A <b>habitat</b> is the place where an organism lives.</>, <>One ecosystem contains <b>many different habitats</b>.</>],
      check: [mc('Which is an ecosystem?', ['A beetle', 'A whole forest and everything in it', 'Sunlight', 'A leaf'], 1, 'It includes the living and non-living parts.'), mc('A habitat is…', ['all living things', 'where an organism lives', 'a food chain', 'a population'], 1, 'An organism\'s home.')] },
    { n: '3.2', t: 'Bioaccumulation in food chains', w: 'bioacc',
      intro: 'Change the toxin level in the water and how much it is concentrated at each level. Watch the top predator.',
      tasks: [['Raise the concentration factor to 10', s => s.f === 10], ['Lower the toxin in the water to 0.01 ppm', s => s.c === 0.01]],
      notice: [<>Some toxins (DDT, mercury) are <b>not broken down or excreted</b>.</>, <>They <b>build up</b> at each level of the food chain.</>, <><b>Top predators</b> get the highest dose, which can harm their health or reproduction.</>],
      check: [mc('Which organism will have the most toxin?', ['Plankton', 'Small fish', 'Large fish', 'Osprey (top predator)'], 3, 'It eats many contaminated animals.'), mc('Bioaccumulation happens because the toxin…', ['breaks down quickly', 'is stored in the body and not excreted', 'is a nutrient', 'evaporates'], 1, 'It stays in the tissues.')] },
    { n: '3.3', t: 'Invasive species', w: 'invasive',
      intro: 'Introduce an invasive species. Change the competition and how much it is controlled, and watch the native population.',
      tasks: [['Introduce the invasive species and watch the native population fall', s => s.intro && s.endN < 40], ['Add predators or control to save the natives', s => s.intro && s.pred >= 3 && s.endN > 50]],
      notice: [<>An <b>invasive species</b> is a non-native species that spreads and causes harm.</>, <>It often has <b>no natural predators</b> and <b>out-competes</b> native species for food and space.</>, <>It can disrupt entire food webs and ecosystems.</>],
      check: [mc('Why do invasive species often spread quickly?', ['They are always bigger', 'No natural predators in the new area', 'They need less water', 'They are protected'], 1, 'Nothing controls their numbers.'), mc('Grey squirrels reduced red squirrel numbers in the UK mainly through…', ['predation', 'competition for food', 'pollution', 'climate'], 1, 'They compete for the same food.')] },
  ],
  practice: [mc('An ecosystem includes…', ['only animals', 'living and non-living things', 'only plants', 'only habitats'], 1, 'Both.'), mc('DDT reached the highest levels in…', ['insects', 'small birds', 'birds of prey', 'plants'], 2, 'The top of the chain.'), mc('Introducing cane toads to Australia is an example of…', ['bioaccumulation', 'an invasive species', 'a habitat', 'respiration'], 1, 'Non-native and harmful.')],
  challenge: [mc('Mercury in water is 0.01 ppm, but in tuna it is 1 ppm. Explain.', ['Tuna make mercury', 'Bioaccumulation: tuna eat many smaller fish that contain mercury', 'The water is wrong', 'Tuna drink more water'], 1, 'It builds up through the food chain.'), mc('Suggest one way to control an invasive plant.', ['Plant more of it', 'Remove it and monitor the area', 'Add fertiliser', 'Ignore it'], 1, 'Physical removal is one method.')],
  recap: { points: ['Ecosystems contain many habitats.', 'Bioaccumulation: persistent toxins build up along food chains.', 'Invasive species out-compete natives and disrupt ecosystems.'], terms: [['Ecosystem', 'Organisms plus their environment.'], ['Bioaccumulation', 'Toxins building up in an organism over time.'], ['Invasive species', 'A non-native species that causes harm.']] } },

{ id: 's4', subj: S, n: 4, title: 'Structure and properties of materials', strand: 'Chemistry', codes: ['8Cm.01', '8Cm.02', '8Cm.03', '8Cp.02'],
  secs: [
    { n: '4.1', t: 'Structure of an atom', w: 'atom',
      intro: 'Repeat Rutherford\'s gold foil experiment, then build an atom from protons, neutrons and electrons.',
      tasks: [['Fire at least 40 alpha particles', s => s.mode === 'foil' && s.shots >= 40], ['Build a neutral carbon atom (6p, 6e)', s => s.mode === 'build' && s.p === 6 && s.e === 6]],
      notice: [<>Rutherford's model: a tiny, dense, <b>positive nucleus</b> with electrons around it. The atom is mostly empty space.</>, <><b>Protons</b> are +, <b>neutrons</b> have no charge, <b>electrons</b> are −.</>, <><b>Electrostatic attraction</b> between the + nucleus and − electrons holds the atom together.</>],
      check: [mc('What did the alpha particles that bounced back show?', ['Atoms are solid', 'There is a small, dense, positive nucleus', 'Electrons are positive', 'Gold is soft'], 1, 'Only a concentrated positive charge could repel them.'), mc('Which particle has no charge?', ['Proton', 'Electron', 'Neutron', 'Nucleus'], 2, 'Neutrons are neutral.')] },
    { n: '4.2', t: 'Paper chromatography', w: 'chroma',
      intro: 'Run the chromatogram. Watch the dyes separate, and identify what is in Unknown X.',
      tasks: [['Run it to the end', s => s.t >= 0.95], ['Try a different solvent', s => s.solv === 'ethanol']],
      notice: [<>Chromatography <b>separates</b> the substances in a mixture.</>, <>More soluble substances travel <b>further</b> up the paper.</>, <>Matching spot heights <b>identify</b> substances. A pure substance gives <b>one spot</b>.</>],
      check: [mc('Why is the start line drawn in pencil?', ['Pencil is cheaper', 'Pencil won\'t dissolve in the solvent', 'Ink runs faster', 'It is easier to see'], 1, 'Ink would separate too.'), mc('A sample gives one spot. It is probably…', ['a mixture', 'pure', 'insoluble', 'a solvent'], 1, 'A single substance.')] },
  ],
  practice: [mc('Where is most of an atom\'s mass?', ['Electrons', 'Nucleus', 'Empty space', 'Shells'], 1, 'Protons and neutrons.'), mc('An atom with 8 protons and 8 electrons is…', ['positive', 'negative', 'neutral', 'an ion'], 2, 'The charges balance.'), mc('Purity describes…', ['colour', 'how much of one specific substance is in a sample', 'temperature', 'mass'], 1, 'Pure means only one substance.')],
  challenge: [mc('In the gold foil experiment, why did MOST alpha particles go straight through?', ['The foil had holes', 'The atom is mostly empty space', 'The particles were too fast', 'Gold is negative'], 1, 'The nucleus is tiny compared with the atom.'), mc('Two inks have spots at the same heights in the same solvent. What does that suggest?', ['They are different', 'They contain the same dyes', 'Both are pure', 'The test failed'], 1, 'Matching positions mean the same substances.')],
  recap: { points: ['Rutherford: small positive nucleus, mostly empty space.', 'Proton +, neutron 0, electron −; electrostatic attraction holds atoms together.', 'Chromatography separates and identifies; pure = one spot.'], terms: [['Nucleus', 'The centre of the atom: protons and neutrons.'], ['Chromatogram', 'The result of a chromatography experiment.'], ['Pure', 'Containing only one substance.']] } },

{ id: 's5', subj: S, n: 5, title: 'Solutions and solubility', strand: 'Chemistry', codes: ['8Cp.01', '8Cc.05'],
  secs: [
    { n: '5.1', t: 'Concentration of solutions', w: 'conc',
      intro: 'Add solute particles and change the volume of water. Watch the concentration.',
      tasks: [['Make a concentrated solution (over 40 per 100 cm³)', s => s.s / s.v * 100 > 40], ['Dilute it below 10 per 100 cm³', s => s.s / s.v * 100 < 10]],
      notice: [<>Concentration = how many <b>solute particles</b> are in a given <b>volume of solvent</b>.</>, <>More solute → <b>more concentrated</b>.</>, <>More solvent → <b>more dilute</b>.</>],
      check: [mc('How do you make a solution more dilute?', ['Add more solute', 'Add more solvent (water)', 'Heat it', 'Stir it'], 1, 'The same particles in more water.'), mc('Solution A: 20 g in 100 cm³. B: 20 g in 200 cm³. Which is more concentrated?', ['A', 'B', 'Same', 'Cannot tell'], 0, 'The same solute in less water.')] },
    { n: '5.2', t: 'Solubility', w: 'solub',
      intro: 'Pick a salt, set the temperature and add salt to 100 g of water. When does it become saturated?',
      tasks: [['Make a saturated solution', s => s.sat], ['Dissolve 100 g of potassium nitrate', s => s.si === 0 && s.add >= 100 && !s.sat]],
      notice: [<><b>Solubility</b> is the maximum mass that dissolves in 100 g of water at a given temperature.</>, <>For most salts, solubility <b>increases with temperature</b>, but by different amounts.</>, <>Cooling a saturated solution makes <b>crystals</b> form.</>],
      check: [mc('Which salt\'s solubility changes least with temperature?', ['Potassium nitrate', 'Sodium chloride', 'Copper sulfate', 'All change equally'], 1, 'Its curve is almost flat.'), mc('A saturated solution is cooled. What happens?', ['More dissolves', 'Crystals form', 'It boils', 'Nothing'], 1, 'Solubility falls, so the extra salt comes out.')] },
  ],
  practice: [mc('Solute + solvent = …', ['mixture of solids', 'solution', 'precipitate', 'element'], 1, 'A solution.'), mc('Concentration depends on…', ['the colour', 'the amount of solute per volume', 'the beaker size', 'the temperature only'], 1, 'Particles per volume.'), mc('Increasing temperature usually makes solubility…', ['increase', 'decrease', 'stay the same', 'zero'], 0, 'For most salts.')],
  challenge: [mc('At 60 °C, 110 g of potassium nitrate dissolves in 100 g of water. At 20 °C only 32 g does. How much crystallises when a saturated 60 °C solution cools to 20 °C?', ['32 g', '78 g', '110 g', '142 g'], 1, '110 − 32 = 78 g.'), mc('Why does stirring NOT change the solubility?', ['It does', 'It only speeds up dissolving; the maximum amount stays the same', 'It cools the water', 'It removes solute'], 1, 'The rate and the limit are different things.')],
  recap: { points: ['Concentration = solute particles per volume of solvent.', 'Solubility: the maximum that dissolves at a given temperature.', 'Most salts are more soluble when hot; cooling a saturated solution gives crystals.'], terms: [['Solute', 'The substance that dissolves.'], ['Solvent', 'The liquid that does the dissolving.'], ['Saturated', 'No more solute can dissolve.']] } },

{ id: 's6', subj: S, n: 6, title: 'Chemical changes', strand: 'Chemistry', codes: ['8Cc.01', '8Cc.02', '8Cc.03', '8Cc.04', '8Cc.06'],
  secs: [
    { n: '6.1', t: 'Using word equations', w: 'slots',
      cfg: { rounds: [
        { p: 'Magnesium burns in oxygen', t: 'magnesium + {} → {}', a: ['oxygen', 'magnesium oxide'], x: ['water', 'hydrogen'] },
        { p: 'Zinc reacts with hydrochloric acid', t: 'zinc + hydrochloric acid → {} + {}', a: ['zinc chloride', 'hydrogen'], x: ['zinc oxide', 'water'] },
        { p: 'An acid neutralises an alkali', t: 'hydrochloric acid + sodium hydroxide → {} + {}', a: ['sodium chloride', 'water'], x: ['hydrogen', 'oxygen'] },
        { p: 'Aerobic respiration', t: 'glucose + {} → {} + water', a: ['oxygen', 'carbon dioxide'], x: ['hydrogen', 'nitrogen'] },
      ] },
      intro: 'Complete each word equation by choosing the right reactants and products.',
      tasks: DONE,
      notice: [<><b>Reactants</b> go on the left of the arrow and <b>products</b> on the right.</>, <>The arrow means "<b>react to make</b>".</>, <>Metal + acid → <b>salt + hydrogen</b>. Acid + alkali → <b>salt + water</b>.</>],
      check: [mc('Copper + oxygen → ?', ['copper oxide', 'copper hydroxide', 'copper chloride', 'oxygen copper'], 0, 'An oxide forms.'), mc('Reactants are…', ['what you end with', 'what you start with', 'only gases', 'catalysts'], 1, 'They go on the left side.')] },
    { n: '6.2', t: 'Pure substances and mixtures', w: 'sort',
      cfg: { bins: ['Pure substance', 'Mixture'], items: [['Distilled water', 0], ['Sea water', 1], ['Oxygen gas', 0], ['Air', 1], ['Gold (24 carat)', 0], ['Orange juice', 1], ['Sodium chloride', 0], ['Crude oil', 1], ['Products of an incomplete reaction', 1]] },
      intro: 'Sort each substance. Remember that a reaction can give an impure mixture of products.',
      tasks: DONE,
      notice: [<>A <b>pure substance</b> contains only one element or compound.</>, <>A <b>mixture</b> contains two or more substances not chemically joined.</>, <>Reactions don't always give one pure product. Sometimes the result is an <b>impure mixture</b>.</>],
      check: [mc('Which is a mixture?', ['Pure water', 'Air', 'Oxygen', 'Iron'], 1, 'Air contains several gases.'), mc('Pure water boils at…', ['exactly 100 °C', 'a range of temperatures', '90 °C', '0 °C'], 0, 'Pure substances have fixed boiling points.')] },
    { n: '6.3', t: 'Measuring temperature changes', w: 'thermo',
      intro: 'Read each thermometer to the nearest 0.5 °C, at eye level.',
      tasks: DONE,
      notice: [<>Read at <b>eye level</b>, level with the top of the liquid.</>, <>Work out what each <b>small division</b> is worth.</>, <><b>Temperature change</b> = final − initial.</>],
      check: [inp('Start 19.5 °C, end 27.0 °C. Temperature change?', ['7.5', '+7.5'], '27.0 − 19.5.', '°C'), mc('Why record to 0.5 °C rather than to the nearest 10?', ['To be more precise', 'To be faster', 'Because it looks better', 'It doesn\'t matter'], 0, 'Precision matters when the changes are small.')] },
    { n: '6.4', t: 'Exothermic and endothermic processes', w: 'exoendo',
      intro: 'Run each reaction and watch the thermometer. Is energy given out or taken in?',
      tasks: [['Test at least 4 reactions', s => s.seen >= 4], ['Find at least one of each type', s => s.exo >= 1 && s.endo >= 1]],
      notice: [<><b>Exothermic</b>: energy is transferred to the surroundings, so the temperature <b>rises</b>.</>, <><b>Endothermic</b>: energy is taken in, so the temperature <b>falls</b>.</>, <>Combustion and neutralisation are exothermic; thermal decomposition is endothermic.</>],
      check: [mc('A reaction mixture goes from 20 °C to 31 °C. It is…', ['endothermic', 'exothermic', 'neutral', 'physical'], 1, 'The temperature rose.'), mc('Which is endothermic?', ['Burning wood', 'Dissolving ammonium nitrate', 'Neutralisation', 'Magnesium + acid'], 1, 'The temperature falls.')] },
    { n: '6.5', t: 'The reactivity series', w: 'reactivity',
      intro: 'Test metals with water, dilute acid and oxygen. Build up the reactivity series.',
      tasks: [['Test at least 6 metals', s => s.tested >= 6], ['Try all three tests', (s, H) => ['water', 'acid', 'oxygen'].every(w => H('with_', w))]],
      notice: [<>Order of reactivity: <b>potassium, sodium, calcium, magnesium, zinc, iron, copper, silver, gold</b>.</>, <>Reactive metals give <b>hydrogen</b> with water or acid.</>, <>Gold and silver are very unreactive; substances like these are described as <b>inert</b>.</>],
      check: [mc('Which reacts most vigorously with water?', ['Iron', 'Copper', 'Potassium', 'Zinc'], 2, 'It is at the top of the series.'), mc('Copper + dilute acid →', ['fizzing', 'no reaction', 'explosion', 'copper oxide'], 1, 'Copper is below hydrogen in reactivity.')] },
  ],
  practice: [mc('Magnesium + sulfuric acid → magnesium sulfate + ?', ['oxygen', 'water', 'hydrogen', 'carbon dioxide'], 2, 'Metal + acid.'), mc('An instant cold pack is…', ['exothermic', 'endothermic', 'combustion', 'neutral'], 1, 'It takes in energy.'), mc('Most reactive of these?', ['Zinc', 'Magnesium', 'Iron', 'Copper'], 1, 'Mg is above Zn.')],
  challenge: [mc('Why is gold found as a pure metal in the ground, but iron is not?', ['Gold is heavier', 'Gold is unreactive, so it doesn\'t form compounds', 'Iron is rarer', 'Gold melts'], 1, 'Unreactive metals stay uncombined.'), mc('A student says an endothermic reaction "makes cold". Improve the explanation.', ['It does make cold', 'It takes in energy from the surroundings, so the temperature falls', 'It releases coldness', 'It stops particles'], 1, 'Energy moves into the reaction.')],
  recap: { points: ['Word equations: reactants → products.', 'Pure = one substance; reactions may give impure mixtures.', 'Exothermic: temperature rises. Endothermic: temperature falls.', 'Reactivity series: K > Na > Ca > Mg > Zn > Fe > Cu > Ag > Au.'], terms: [['Exothermic', 'Gives out energy to the surroundings.'], ['Endothermic', 'Takes in energy from the surroundings.'], ['Inert', 'Generally unreactive.']] } },

{ id: 's7', subj: S, n: 7, title: 'Measuring motion', strand: 'Physics', codes: ['8Pf.01', '8Pf.02'],
  secs: [
    { n: '7.1', t: 'Measuring distance and time', w: 'timer',
      intro: 'Test your reaction time. Why does it matter when timing with a stopwatch?',
      tasks: [['Complete 5 trials', s => s.n >= 5]],
      notice: [<>Measure distance with a ruler, tape measure or trundle wheel; time with a stopwatch or light gates.</>, <>Human <b>reaction time</b> (about 0.2 s) adds error to hand timing.</>, <><b>Repeat</b> measurements and calculate a mean to improve reliability.</>],
      check: [mc('Best way to time a 0.5 s event?', ['Hand stopwatch', 'Light gates', 'Counting', 'Sundial'], 1, 'Light gates remove reaction time.'), mc('Why repeat measurements?', ['To use more time', 'To spot anomalies and calculate a reliable mean', 'To get a different answer', 'It\'s not needed'], 1, 'Reliability.')] },
    { n: '7.2', t: 'Speed and average speed', w: 'speed',
      intro: 'Set a distance and a time. Calculate the speed, then watch the run.',
      tasks: [['Make a speed of 10 m/s', s => Math.abs(s.s - 10) < 0.001], ['Run the animation', s => s.run > 0.5]],
      notice: [<><b>speed = distance ÷ time</b>.</>, <>Units: <b>m/s</b> or <b>km/h</b>.</>, <><b>Average</b> speed uses the <b>total</b> distance ÷ <b>total</b> time.</>],
      check: [inp('A cyclist travels 600 m in 120 s. Speed?', '5', '600 ÷ 120.', 'm/s'), inp('A car travels at 20 m/s for 15 s. Distance?', '300', '20 × 15.', 'm')] },
    { n: '7.3', t: 'Distance/time graphs', w: 'dtgraph',
      intro: 'Change the speed and duration of each section of the journey. Watch the gradient.',
      tasks: [['Make a section where the object is stationary', s => s.segs.some(x => x[0] === 0)], ['Make the steepest section 4 m/s', s => Math.max(...s.segs.map(x => x[0])) === 4]],
      notice: [<>A <b>flat line</b> means stationary.</>, <>A <b>steeper line</b> means faster.</>, <><b>Gradient = speed</b> = distance ÷ time for that section.</>],
      check: [mc('A horizontal line on a distance/time graph means…', ['constant speed', 'stopped', 'accelerating', 'moving backwards'], 1, 'Distance isn\'t changing.'), inp('A section rises 30 m in 6 s. Speed?', '5', '30 ÷ 6.', 'm/s')] },
  ],
  practice: [inp('Average speed: 120 km in 2 h?', '60', '120 ÷ 2.', 'km/h'), inp('Time to travel 500 m at 25 m/s?', '20', '500 ÷ 25.', 's'), mc('Steeper line on a d/t graph =', ['slower', 'faster', 'stopped', 'backwards'], 1, 'Faster.')],
  challenge: [inp('A runner does 100 m in 12 s, rests for 8 s, then does 100 m in 20 s. Average speed for the whole time?', '5', '200 m ÷ 40 s.', 'm/s'), mc('Why might a hand-timed 100 m race be inaccurate?', ['Tracks vary', 'Reaction time of the timer at start and finish', 'Shoes', 'Weather'], 1, 'Human reaction.')],
  recap: { points: ['Repeat measurements; light gates avoid reaction-time error.', 'speed = distance ÷ time; average speed uses totals.', 'd/t graph: flat = stopped, gradient = speed.'], terms: [['Speed', 'Distance travelled per unit time.'], ['Average speed', 'Total distance ÷ total time.'], ['Gradient', 'Steepness of a graph line.']] } },

{ id: 's8', subj: S, n: 8, title: 'Forces', strand: 'Physics', codes: ['8Pf.03', '8Pf.04', '8Pf.05', '8Pf.06', '8Pf.07'],
  secs: [
    { n: '8.1', t: 'Balanced and unbalanced forces', w: 'forces',
      intro: 'Change the driving force and friction. Watch how the box\'s motion changes.',
      tasks: [['Make the forces balanced', s => s.net === 0], ['Make the box speed up', s => s.net > 0], ['Make the box slow down', s => s.net < 0]],
      notice: [<><b>Balanced</b> forces: no change in motion. Still objects stay still; moving objects keep a steady speed.</>, <><b>Unbalanced</b> forces change speed or direction.</>, <><b>Resultant force</b> = the difference between the opposing forces.</>],
      check: [mc('A car moves at a steady 30 m/s. The forces are…', ['unbalanced', 'balanced', 'zero', 'only friction'], 1, 'There is no change in speed.'), inp('Forward 500 N, drag 350 N. Resultant?', '150', '500 − 350.', 'N')] },
    { n: '8.2', t: 'Turning effect of a force', w: 'moments',
      intro: 'Balance the beam using different weights and distances.',
      tasks: [['Balance it with unequal weights', s => s.mL === s.mR && s.L && s.L.F !== s.R.F], ['Make it tip clockwise', s => s.mR > s.mL]],
      notice: [<><b>Moment = force × distance</b> from the pivot (Nm).</>, <>Balanced when clockwise moment = anticlockwise moment.</>, <>Longer levers need less force.</>],
      check: [inp('40 N at 0.5 m from a pivot. Moment?', '20', '40 × 0.5.', 'Nm'), mc('Why are door handles far from the hinge?', ['Looks', 'A larger distance gives a larger moment for the same force', 'To reduce friction', 'Safety'], 1, 'M = Fd.')] },
    { n: '8.3', t: 'Pressure on an area', w: 'pressure',
      intro: 'Compare the same force on different areas: feet, heels, skis and knife edges.',
      tasks: [['Try all four objects', (s, H) => ['feet', 'heel', 'ski', 'knife'].every(o => H('obj', o))]],
      notice: [<><b>Pressure = force ÷ area</b>. Unit: Pa (N/m²).</>, <><b>Small area</b> → high pressure (knives, heels).</>, <><b>Large area</b> → low pressure (skis, tractor tyres).</>],
      check: [inp('A force of 200 N acts on 4 m². Pressure?', '50', '200 ÷ 4.', 'Pa'), mc('Why do snowshoes stop you sinking?', ['They are light', 'A large area gives a low pressure', 'They are warm', 'More friction'], 1, 'The force is spread out.')] },
    { n: '8.4', t: 'Pressure and diffusion in gases and liquids', w: 'gasbox',
      intro: 'Watch the gas particles hit the walls. Change the temperature and volume, then watch diffusion.',
      tasks: [['Heat the gas to 80 °C or more', s => s.mode === 'pressure' && s.T >= 80], ['Squash the volume to 0.5 L', s => s.V === 0.5], ['Watch diffusion', s => s.mode === 'diffusion']],
      notice: [<>Gas pressure comes from particles <b>colliding with the walls</b>.</>, <>Hotter → faster particles; smaller volume → more frequent collisions. Both <b>raise the pressure</b>.</>, <><b>Diffusion</b>: random particle movement spreads substances from high to low concentration.</>],
      check: [mc('Why does a tyre\'s pressure rise on a hot day?', ['The rubber expands', 'The particles move faster and hit the walls harder and more often', 'Air is added', 'The tyre shrinks'], 1, 'Particle theory.'), mc('Why does a smell spread across a room?', ['Wind only', 'Diffusion of gas particles', 'Gravity', 'Pressure'], 1, 'Random movement spreads them out.')] },
  ],
  practice: [inp('Pressure: 600 N on 0.03 m²?', '20000', '600 ÷ 0.03.', 'Pa'), inp('Balance: 30 N at 2 m vs 20 N at ? m', '3', '60 ÷ 20.', 'm'), mc('Diffusion is faster in…', ['solids', 'liquids', 'gases', 'all equally'], 2, 'Gas particles move fastest.')],
  challenge: [mc('Why does liquid pressure increase with depth?', ['Liquids get hotter', 'There is more liquid above pushing down', 'The particles get bigger', 'It doesn\'t'], 1, 'The weight of the liquid above.'), inp('A box weighs 120 N. Its base is 0.4 m × 0.5 m. Pressure on the floor?', '600', '120 ÷ 0.2.', 'Pa')],
  recap: { points: ['Balanced: motion unchanged. Unbalanced: speed or direction changes.', 'Moment = F × d; balanced when the moments are equal.', 'Pressure = F ÷ A; gas pressure comes from particle collisions.', 'Diffusion: particles intermingle by random movement.'], terms: [['Resultant force', 'The overall force on an object.'], ['Pascal (Pa)', 'Unit of pressure: N/m².'], ['Diffusion', 'Particles spreading from high to low concentration.']] } },

{ id: 's9', subj: S, n: 9, title: 'Light', strand: 'Physics', codes: ['8Pl.01', '8Pl.02', '8Pl.03', '8Pl.04'],
  secs: [
    { n: '9.1', t: 'Reflection', w: 'reflect',
      intro: 'Change the angle of incidence. Compare a smooth mirror with a rough surface.',
      tasks: [['Set the angle to 60°', s => s.a === 60 && !s.rough], ['Try a rough surface', s => s.rough]],
      notice: [<><b>Law of reflection</b>: angle of incidence = angle of reflection.</>, <>Angles are measured from the <b>normal</b> (the line at 90° to the surface).</>, <>Rough surfaces give <b>diffuse</b> reflection, so there is no clear image.</>],
      check: [inp('A ray hits a mirror at 35° to the normal. Angle of reflection?', '35', 'They are equal.', '°'), mc('A ray hits a mirror at 20° to the SURFACE. Angle of incidence?', ['20°', '70°', '90°', '160°'], 1, 'Measure from the normal: 90 − 20.')] },
    { n: '9.2', t: 'Refraction', w: 'refract',
      intro: 'Change the angle and the material. Watch the light bend at the boundary.',
      tasks: [['Send light in at 0°', s => s.a === 0], ['Compare glass and water at the same angle', (s, H) => H('med', 'glass') && H('med', 'water')]],
      notice: [<>Light <b>changes speed</b> when it crosses into a different material.</>, <>Entering glass or water it <b>slows</b> and bends <b>towards</b> the normal.</>, <>Along the normal (0°) it slows down but <b>doesn't bend</b>.</>],
      check: [mc('Light going from air into glass bends…', ['away from the normal', 'towards the normal', 'not at all', 'backwards'], 1, 'It slows down.'), mc('Why does a straw look bent in water?', ['The straw bends', 'Light refracts as it leaves the water', 'Reflection', 'Absorption'], 1, 'Refraction at the surface.')] },
    { n: '9.3', t: 'Coloured light', w: 'colour',
      intro: 'Mix coloured lights, split white light with a prism, then test filters and objects.',
      tasks: [['Make white light by adding colours', s => s.mode === 'mix' && s.rgb === '111'], ['Make yellow light', s => s.mode === 'mix' && s.rgb === '110'], ['Make a red object look black', s => s.mode === 'filter' && s.obj === 'red' && ['green', 'blue', 'cyan'].includes(s.filt)]],
      notice: [<>White light is a <b>mixture of colours</b>, and a prism <b>disperses</b> it into a spectrum.</>, <>Adding red, green and blue light makes <b>white</b>.</>, <>Filters <b>let through</b> their own colour; objects <b>reflect</b> their own colour and absorb the rest.</>],
      check: [mc('Red + green light = ?', ['Brown', 'Yellow', 'White', 'Cyan'], 1, 'Additive mixing.'), mc('A blue shirt under red light looks…', ['blue', 'red', 'black', 'purple'], 2, 'There is no blue light to reflect.')] },
  ],
  practice: [mc('The normal is…', ['the mirror surface', 'a line at 90° to the surface', 'the reflected ray', 'the incident ray'], 1, 'Perpendicular.'), mc('A prism separates white light by…', ['reflection', 'dispersion (refraction)', 'absorption', 'diffraction'], 1, 'Each colour refracts by a different amount.'), mc('A green filter lets through…', ['all colours', 'green only', 'red only', 'nothing'], 1, 'It absorbs the rest.')],
  challenge: [mc('Why can you see yourself in a mirror but not in a white wall?', ['Walls absorb light', 'A mirror reflects regularly; a wall scatters light (diffuse reflection)', 'Walls are rough so light passes through', 'Mirrors make light'], 1, 'Regular vs diffuse reflection.'), mc('Violet light bends more than red light in a prism. This means violet…', ['speeds up more', 'slows down more in glass', 'is reflected', 'is absorbed'], 1, 'More slowing means more bending.')],
  recap: { points: ['Reflection: i = r, measured from the normal.', 'Refraction: a change of speed bends light; it bends towards the normal entering a denser medium.', 'White light disperses; filters transmit and objects reflect their own colour.'], terms: [['Normal', 'A line at 90° to a surface.'], ['Refraction', 'Bending due to a change in speed.'], ['Dispersion', 'Splitting white light into colours.']] } },

{ id: 's10', subj: S, n: 10, title: 'Magnets', strand: 'Physics', codes: ['8Pe.01', '8Pe.02', '8Pe.03'],
  secs: [
    { n: '10.1', t: 'Magnets and magnetic materials', w: 'magnet',
      intro: 'Drag the compass around the magnet to trace the field. Then bring two magnets together.',
      tasks: [['Show two magnets', s => s.two], ['Flip a magnet so like poles face', s => s.two && s.flip]],
      notice: [<>A <b>magnetic field</b> surrounds a magnet; field lines go from <b>N to S</b>.</>, <>The field is <b>strongest</b> where the lines are closest (at the poles).</>, <>Like poles <b>repel</b>, unlike poles <b>attract</b>. Iron, nickel and cobalt are magnetic materials.</>],
      check: [mc('Field lines point…', ['S to N', 'N to S', 'in circles only', 'nowhere'], 1, 'From N to S outside the magnet.'), mc('Which is magnetic?', ['Copper', 'Aluminium', 'Iron', 'Plastic'], 2, 'Iron, nickel and cobalt.')] },
    { n: '10.2', t: 'Electromagnets', w: 'electromag',
      intro: 'Change the number of turns, the current and the core. How many paperclips can it lift?',
      tasks: [['Lift 12 paperclips', s => s.clips >= 12], ['Show that no core makes it weak', s => s.core === 'none' && s.on], ['Switch it off', s => !s.on]],
      notice: [<>A current in a coil makes a <b>magnetic field</b>, and an <b>iron core</b> makes it much stronger.</>, <>To increase strength: <b>more turns, more current, iron core</b>.</>, <>It can be <b>switched off</b>, which is useful for cranes, locks and relays.</>],
      check: [mc('Which does NOT make an electromagnet stronger?', ['More turns', 'More current', 'An iron core', 'A longer wire with fewer turns'], 3, 'Fewer turns weakens it.'), mc('Why is an electromagnet useful in a scrapyard crane?', ['It is cheap', 'It can be switched off to drop the metal', 'It works on plastic', 'It is permanent'], 1, 'It is controllable.')] },
  ],
  practice: [mc('N and N poles…', ['attract', 'repel', 'do nothing', 'stick'], 1, 'Like poles repel.'), mc('The best core for an electromagnet?', ['Copper', 'Soft iron', 'Wood', 'Plastic'], 1, 'Iron.'), mc('Doubling the current through the coil makes the field…', ['weaker', 'stronger', 'disappear', 'reverse'], 1, 'Stronger.')],
  challenge: [mc('Plan a fair test of how the number of turns affects strength. What must stay the same?', ['Number of turns', 'Current and core', 'Number of paperclips', 'Nothing'], 1, 'Control the other variables.'), mc('Why is soft iron used rather than steel in an electromagnet that must switch off?', ['Steel is heavier', 'Soft iron loses its magnetism quickly when the current stops', 'Iron conducts better', 'Steel is not magnetic'], 1, 'Steel stays magnetised.')],
  recap: { points: ['Field lines go N → S; they are closest at the poles.', 'Like poles repel; unlike poles attract.', 'Electromagnet strength: turns, current, core; it can be switched off.'], terms: [['Magnetic field', 'The region where a magnetic force acts.'], ['Electromagnet', 'A magnet produced by an electric current.'], ['Core', 'The material inside the coil.']] } },

{ id: 's11', subj: S, n: 11, title: 'The Earth and its resources', strand: 'Earth and space', codes: ['8ESc.01', '8ESc.02', '8ESc.03', '8ESp.01', '8ESp.02'],
  secs: [
    { n: '11.1', t: 'Climate and weather', w: 'climate',
      intro: 'Compare one week of daily temperatures with the long-term average.',
      tasks: [['View the long-term climate', s => s.view === 'year']],
      notice: [<><b>Weather</b> is the day-to-day state of the atmosphere.</>, <><b>Climate</b> is the average weather over a long time (30+ years).</>, <>One cold week doesn't change the climate.</>],
      check: [mc('"London is mild and wet" describes…', ['weather', 'climate', 'a forecast', 'pressure'], 1, 'It is a long-term pattern.'), mc('"It will rain tomorrow" is about…', ['weather', 'climate', 'both', 'neither'], 0, 'One day.')] },
    { n: '11.2', t: 'Climate change', w: 'co2',
      intro: 'Look at Earth\'s natural climate cycles, then change the CO₂ in the atmosphere.',
      tasks: [['View the natural cycles', s => s.mode === 'cycle'], ['Raise CO₂ above 600 ppm', s => s.mode === 'co2' && s.co2 > 600]],
      notice: [<>Evidence (ice cores) shows the climate has <b>cycled</b> between ice ages and warm periods over very long times.</>, <>Changes to the <b>atmosphere</b> can change the climate.</>, <>Extra CO₂ from burning fossil fuels traps more heat, causing global warming.</>],
      check: [mc('Ice ages and warm periods show…', ['the climate never changes', 'the climate changes in long cycles', 'only humans change the climate', 'weather is random'], 1, 'There are natural cycles.'), mc('A main human cause of current climate change?', ['Volcanoes', 'Burning fossil fuels releasing CO₂', 'The Moon', 'Earthquakes'], 1, 'Greenhouse gases.')] },
    { n: '11.3', t: 'Renewable and non-renewable resources', w: 'energymix',
      intro: 'Power a town using different energy sources. Can you reach 100 units with low CO₂?',
      tasks: [['Reach 100 power units', s => s.tot >= 100], ['Reach 100 with more than 70% renewable', s => s.tot >= 100 && s.renPct > 0.7]],
      notice: [<><b>Non-renewable</b> resources (coal, oil, gas) will run out and release CO₂.</>, <><b>Renewable</b> resources (wind, solar, tidal, hydro, bioplastics from plants) are replaced naturally.</>, <>Earth's core acts like a magnet, giving Earth its <b>magnetic field</b>.</>],
      check: [mc('Which is renewable?', ['Coal', 'Natural gas', 'Tidal power', 'Oil'], 2, 'It is driven by the Moon and won\'t run out.'), mc('A disadvantage of solar power?', ['It produces CO₂', 'It depends on sunlight and weather', 'It will run out', 'It is a fossil fuel'], 1, 'There is none at night.')] },
  ],
  practice: [mc('Climate is measured over about…', ['a day', 'a week', '30 years', 'an hour'], 2, 'Long term.'), mc('Bioplastics come from…', ['oil', 'plants', 'metal', 'rock'], 1, 'Renewable plant material.'), mc('Why does Earth have a magnetic field?', ['The Moon', 'Its core acts like a magnet', 'Sunlight', 'Oceans'], 1, 'An iron core.')],
  challenge: [mc('Suggest why a country might use both wind and gas power.', ['Gas is renewable', 'Wind varies, so gas can provide backup when it\'s calm', 'Wind produces CO₂', 'They are the same'], 1, 'Reliability.'), mc('A cold winter happens. Does this disprove global warming?', ['Yes', 'No: one season is weather; climate is the long-term average', 'Yes, if very cold', 'Only in Europe'], 1, 'Weather vs climate.')],
  recap: { points: ['Weather = short term; climate = long-term average.', 'The climate cycles naturally; atmospheric change (CO₂) causes warming now.', 'Renewable vs non-renewable resources; Earth\'s core gives it a magnetic field.'], terms: [['Climate', 'The long-term average weather.'], ['Greenhouse gas', 'A gas that traps heat in the atmosphere.'], ['Renewable', 'Replaced naturally and won\'t run out.']] } },

{ id: 's12', subj: S, n: 12, title: 'Earth in space', strand: 'Earth and space', codes: ['8ESs.01', '8ESs.02'],
  secs: [
    { n: '12.1', t: 'Asteroids', w: 'asteroids',
      intro: 'Run time forward on a young planetary system. Watch the planets form and see what is left over.',
      tasks: [['Run until planets have formed', s => s.t >= 0.9]],
      notice: [<>Planetary systems form from a disc of <b>dust and rock</b> around a young star.</>, <>Rocks collide and clump into planets.</>, <><b>Asteroids</b> are leftover rocks, smaller than planets, many of them in the asteroid belt.</>],
      check: [mc('Asteroids are…', ['small stars', 'rocks smaller than planets left over from the system\'s formation', 'moons', 'comets made of ice'], 1, 'Leftover rocky bodies.'), mc('The main asteroid belt is between…', ['Earth and Mars', 'Mars and Jupiter', 'Jupiter and Saturn', 'the Sun and Mercury'], 1, 'Between Mars and Jupiter.')] },
    { n: '12.2', t: 'Stars and galaxies', w: 'galaxy',
      intro: 'Zoom out from a planetary system to a star, a galaxy and the universe.',
      tasks: [['Zoom to the galaxy', s => s.z === 2], ['Zoom to the universe', s => s.z === 3]],
      notice: [<>A <b>star</b> is a huge ball of hot gas that produces light.</>, <>A <b>galaxy</b> contains billions of stars and their planetary systems, plus <b>dust and gas</b>.</>, <>Our galaxy is the <b>Milky Way</b>, one of billions in the universe.</>],
      check: [mc('A galaxy is made of…', ['one star', 'stars, planetary systems, dust and gas', 'only planets', 'asteroids only'], 1, 'Billions of stars and more.'), mc('Order from smallest to largest:', ['Galaxy, star, universe', 'Planetary system, galaxy, universe', 'Universe, galaxy, star', 'Star, universe, galaxy'], 1, 'Planetary system < galaxy < universe.')] },
  ],
  practice: [mc('Our galaxy is called…', ['Andromeda', 'the Milky Way', 'the Solar System', 'Orion'], 1, 'The Milky Way.'), mc('Stars produce light by…', ['reflection', 'nuclear fusion', 'burning coal', 'electricity'], 1, 'Fusion.'), mc('Asteroids formed from…', ['old stars', 'rock left over from planet formation', 'comets', 'moons'], 1, 'Leftover material.')],
  challenge: [mc('Why didn\'t the asteroid belt form a planet?', ['Too cold', 'Jupiter\'s gravity disturbed the rocks so they couldn\'t clump together', 'No rocks', 'It did'], 1, 'Gravitational disturbance.'), ord('Order from smallest to largest:', ['Galaxy', 'Asteroid', 'Planetary system', 'Universe'], [1, 2, 0, 3], 'Asteroid < planetary system < galaxy < universe.')],
  recap: { points: ['Asteroids: rocky leftovers from the formation of a planetary system.', 'Stars → planetary systems → galaxies (stars, dust, gas) → universe.', 'The Milky Way is our galaxy.'], terms: [['Asteroid', 'A rocky body smaller than a planet.'], ['Galaxy', 'A huge system of stars, dust and gas.'], ['Planetary system', 'A star and the bodies orbiting it.']] } },
);
})();
